Blog
Discover our latest articles and blogs
9 Step Headphone Calibration Workflow for Mix Engineers
Follow a session ready, 9 step monitoring workflow to calibrate headphones for mixing: measure or load a profile, set SPL and phase mode, then run...
Measure First: Mix Imaging Consistency for Producers in 15 Minutes
A measure first checklist and 15 minute verification sequence that ensures mix imaging consistency translates to headphones, phones and mono.
−14 LUFS, −1 dBTP: How Producers Meter for Streaming with AubioMix
Measurement first workflow for producers: aim near −14 LUFS, keep True Peak at −1 dBTP, and verify with AubioMix benchmarks before upload.
Stop Mono Collapse: 5 Step Phase Scope Checklist for Mix Engineers
Use phase scope patterns and a 5 step diagnostic workflow to find and fix stereo phase problems, then verify your fixes with an AubioMix review.
Producers: 10 Step Frequency Balance Analysis to Fix Mud and Harshness
10 step workflow for producers to measure and fix frequency balance using DAW analyzers, genre target curves, and AubioMix verification.
4 Checkpoints to Fix Translation and Clarity in Mix Reports (Producers)
Use a mix report as a revision workflow with four checkpoints. Receive prioritized fixes for EQ, dynamics and device translation before mastering.
Producers: Upload First Mix Analysis Workflow for Actionable Feedback
Producers: prepare stems, export 32 bit WAVs, hit -14 LUFS/-1 dBTP, add a reference, then triage AubioMix feedback (£4.99).
1–2 dB Per Octave: Measure Spectral Tilt for Mix Engineers
A measurement first workflow for engineers: read H1 to H2 and slope in dB per octave, calibrate with pink noise, then apply tilt with DAW-friendly filters.
3 Quick Moves Mix Engineers Use to Fix Phase Alignment in Mixing
Session tested checklist for mix engineers: mono check, polarity flip, then sample nudging to fix drum and multi mic phase problems. Verify results with...